CI-5100 & CI-5100 C
CI-5100 T & CR-5510
CRCI-5500 & F1-3000
F1-5000 & F1-ACE
F1-FOX & FTV-5600
IRCI-5400 & VA-FOX
VACI-5300 & VA-5200 & VA-5210
Download Tools and Instruction for OAK
1. Install 'WDN4OAK+.ZIP' into your computer.
2.Connect your PC to the STB with RS-232C serial cable as below
diagram.
3. Follow below steps.
HUMAX IRCI-5400Z (for Europe)
Download Tools and Instruction
for IRCI-5400Z
Please make sure that your software version is ZIC, because
we have three kinds of version for IRCI-5400Z.
1. Download the wdn4z.zip and
the software ZIC10501.sdl onto your PC.
2. Connect your PC and your receiver with null modem cable.
pls refer to below picture.
3. Execute the wdn4z.exe.
4. Set "Configure" and open the ZIC10501.sdl file.
5. Press Start button and then power on your receiver with main power or
standby key and if there is no reaction, pls recheck the COM port and
baudrates.
طريقة تطوير الاجهزة التالية
Model ( F1, F1-CI, F1-VA, F1-VACI )
Download Instruction for OLD and SuperSet Model (F1, F1-CI, F1-VA and F1-VACI)
Download a HDF file from PC to STB using the Windn.exe file
1. Install 'humax11.exe' into your computer. (WinDN 1 V1.04)
2. Connect the power cable to the STB but ensuring that the power switch is off.
3. Connect the serial cable from the PC to the STB and start the Windn.exe application.
4. In Windn, select the Settings option from the Action menu.
5. A new window will appear. From this window select the Baud
Rate and COM port using the drop down menus and then click OK.
Now select the Connect option form the Action menu.
6. A new window will appear. From this window select the HDF
file you wish to use and click Open.
You will now see the message 'waiting'.
7. Switch on you STB, the downloading process will now begin.
Please wait until you see 'End' displayed on the STB front
panel.
Restart the STB and enjoy!
