Satellite with Alt-Dvb
If to form Skyview it is a martyrdom (that can get to be it),
it is not of more than you prove another excellent gratuitous program
that, in addition, is much more easy to form. That yes,
is in phase beta and is some aspects that lie down in lack: a
programmer, the formable window of telex, etc.
The program is called Alt-Dvb and is aqui ': Alt-Dvb
Here a basic configuration will be outlined.
If you want to add plugins varied (weekly programming, desencriptación) you must do it just as with Skyview, ProgDvb
and similars.
For configuration of filters and explanations on creation of graphs,
I recommend to throw a look to the guide "satellite I" and "reproduction of means".
0) Selection of the card
After installing the program, we needed to unload of the official page
the module corresponding to our card.
We took the program and it leaves this window to us, where we will
select the card :
1) Escaneo of transponders
Before beginning, it remembers to unload the first file 0192.ini (if
you use Astra) updated and cópialo in the folder "Sat-Files
==> Transponders".
The first step is the following one; we selected Scan and it leaves
this window to us.
We chose our satellite and we accepted.
If our satellite nonfigure in the selected list, will be enough to give
"add" to add it.
Soon we give "Select" and we chose all the transponders.
Once scanned the transponders, they will appear to us data similar to
those of the following capture :
If we chose to update (case of having made the scanned one previously),
it will leave this ventanita to us :
If it is the first time that we used the program, we can choose "Replace" so that it puts all the channels new (those
that we finished scanning).
Also it is a useful option if we wished to borrar/sustituir the
existing channels.
2) basic Configuration
a) Data of the channels and update
:
We selected any channel and we will see that in the inferior box of the
right they appear to us a series of data on the chosen channel :
Sometimes, the suppliers update the values or data of some channels, reason why it agrees that we do the same (otherwise the channel at
issue not side ').
We selected the channel and we give "edit" :
Next we selected "Rescan" and it will say to us if there are changes or no. Case of having them, we will have to choose "save" to keep those changes :
b) PiP
The popular PiP way also can be used with Alt-Dvb :
The secondary window can be modified of position, size, etc, and can
also qualify the sound.
If we closed all the pictures of information, we would have left to
something asi ' :
c1) Properties of the card
In the eyelash "Hardware" of "Card Properties" indicates the PIDs to us
of the channel that we are seeing as well as the version of drivers of the card and
other data :
c2) Configuration of the decoding
filters.
In the Settings eyelash - > Video/DirectShow --> DVB-Main
we will select what codecs we will use to see the channels; like almost
always, those of Intervideo usually are those that fulfill better in ALL the
aspects, is enough to select it in the drop-down window :
From version 2 post-processing is possible to add to the image, so and
as it is appraised in the image.
Apply is necessary to give "save and" so that it applies the filters
and it keeps that created profile to us.
When reproducing any channel, with the right button of the mouse we can accede to the properties of
DirectShow and see what filters are being used :
If we selected codec of audio or video during the reproduction is
possible to accede to the configuration of the same one :
d1) Recording
In the eyelash "Recording" of "Settings" he is recommendable to
activate the squares so and as it is seen in the capture and choose the folder in which the
archives will be recorded :
Finally, when we selected "Record" appears to us this window in which we will mark the squares that we wish (usually they correspond to the
different channels from audio and subtitles, case of having them) :
d2) Programmer
From version 2, a programmer exists; something simple, but functional. We selected any channel, we give the right button and we give
"scheduler" :
In the following ventanita we introduce the data (hour of recording,
duration, etc) :
Finally, we verified that in the eyelash "to scheduler" they appear to
us the data that we finished introducing :
e) Plug-ins
They are placed in the corresponding folder and soon it is acceded to
them in the Plugins icon of the main screen; in the capture all the
information available on plug-in at issue is appraised :
f) Subtitulos
It is possible to activate the subtitles and to see them in screen of
very simple way. First it is necessary to verify if the channel at issue has subtitles
and, case of having them, in what page of the telex is.
Once we know the page of the telex, we introduce it manually so and as
it is seen in the capture :
If we have done it well, us they would have to appear the subtitles in
screen (the color and the size are modifiable) :
